The Structure
The FLAPP-cube consists of a snap-together frame made of square tubes.
By using vertical frame components of different lengths, a total of 6 heights
can be configured.
The wide range of configurations is made possible, among other things,
by the optional use of additional brand boards.
Adjustable, sturdy, large outdoor feet allow for setup even on uneven
and wet surfaces. These can alternatively be replaced with casters.
Magnetic points from a patented mounting system are located all around the frame, enabling tool-free installation of boards. Unlocking and removal are only possible upwardly, which allows even heavy products to be hung.
Unique: These boards can be easily swapped out individually, enabling a
quick change of branding, graphics, or presentation space.
The top surface can also be configured flexibly and is equipped with interchangeable boards.
Transport & Weight
For easy transport, all boards can be removed and the frame disassembled.
This creates a compact and portable transport configuration.
Lightweight aluminum and sandwich boards ensure a manageable weight.
The Material
The FLAPP-cube consists of a waterproof aluminum frame,
whose surface can be fitted with lightweight aluminum sandwich boards.
These boards are also useable for other units of the FLAPP family.
The Mounting System
The top and side surfaces can be used for product display.
The top can optionally be fitted with a rail frame that provides one, two, or three mounting rails, depending on the choice of top board. A wide variety of product displays from the FLAPP accessory line can be attached to these rails.
The FLAPP-cube can be flexibly fitted all around with interchangeable boards from the FLAPP family. These can serve for decorative surfaces, product mounting, or graphic communication.
The top can optionally be fitted with a rail frame that provides one, two, or three mounting rails, depending on the choice of top board. A wide variety of product displays from the FLAPP accessory line can be attached to these rails.
The FLAPP-cube can be flexibly fitted all around with interchangeable boards from the FLAPP family. These can serve for decorative surfaces, product mounting, or graphic communication.
Setup Options
The FLAPP-cube can be set up individually or in combination.
Cubes of the same or different heights can be combined.
They can be stacked vertically as a column or combined horizontally
as a presentation table.
Additionally, it can be connected to other displays from the FLAPP-family.
Ease of Repair
All elements of the FLAPP-cube are screwed and plugged together, so that in
the event of damage, individual components can be replaced without having
to replace the entire display.